Removing/refiitting wheels
+3
Cazzo
omer yetis
bmd
7 posters
Page 2 of 2
Page 2 of 2 • 
1, 2
Re: Removing/refiitting wheels
Ted Creedon Tue Dec 03, 2013 6:29 pm
You're a star - cheers.bmd wrote:yes ted, funny you should say that , will be doing just that over the next day or two...watch this space m8!
Ted Creedon- Posts : 1197
Join date : 2012-02-09
Age : 111
Location : Republic of Cork
Re: Removing/refiitting wheels
bmd Wed Dec 04, 2013 8:25 pm
ok, sunstar 1:18 ascona added to start of thread.... 
bmd- Posts : 6996
Join date : 2012-02-12
Age : 57
Location : here
Re: Removing/refiitting wheels
Ted Creedon Thu Dec 05, 2013 9:00 am
Thanks Billy. I would pick the awkward one to start with
Ted Creedon- Posts : 1197
Join date : 2012-02-09
Age : 111
Location : Republic of Cork
Re: Removing/refiitting wheels
bmd Thu Dec 05, 2013 9:14 am
no probs m8, don't worry I accidentally broke the first of the calipers off, then realised that it wont be seen when manta rims are fitted anyway.... 
bmd- Posts : 6996
Join date : 2012-02-12
Age : 57
Location : here
Re: Removing/refiitting wheels
Slowlysideways Wed Jan 01, 2014 7:24 pm
Billy as requested:
the wheel change on the Quattro S1 was done with ATS Classic style wheels by Uli Nowak and the rubber specification (Reifen) was "Slick breit"
http://www.modellbau-nowak.de/shop/product_info.php?info=p386_99094-15-alufelge-1-18-ats-classic-design-15-zoll-uni.html
I simply modified the rims by filling the hollow room with "Revell PLASTO" body kit and then "sand papered" it. For the 5x wheel bolts, I cut some wire into 3mm length pieces and glued it into the rim inlet ring.
cheers
the wheel change on the Quattro S1 was done with ATS Classic style wheels by Uli Nowak and the rubber specification (Reifen) was "Slick breit"
http://www.modellbau-nowak.de/shop/product_info.php?info=p386_99094-15-alufelge-1-18-ats-classic-design-15-zoll-uni.html
I simply modified the rims by filling the hollow room with "Revell PLASTO" body kit and then "sand papered" it. For the 5x wheel bolts, I cut some wire into 3mm length pieces and glued it into the rim inlet ring.
cheers
Last edited by Slowlysideways on Thu Jan 02, 2014 1:05 pm; edited 1 time in total
Slowlysideways- Posts : 79
Join date : 2013-10-01
Location : Austria
Re: Removing/refiitting wheels
bmd Wed Jan 01, 2014 10:42 pm
nice work tom, how did the removal/refitting work out for you?
cheers m8!!
cheers m8!!
bmd- Posts : 6996
Join date : 2012-02-12
Age : 57
Location : here
Page 2 of 2 • 1, 2
Similar topics» removing tape residue....
» Removing Masking Tape Residue
» Removing bodies from the chassis of Ixo models
» Removing Tampo Print from IXO models
» removing decals from resin models?
» Removing Masking Tape Residue
» Removing bodies from the chassis of Ixo models
» Removing Tampo Print from IXO models
» removing decals from resin models?
Page 2 of 2
Permissions in this forum:
You cannot reply to topics in this forum|
|
|